Right Bumper Support 93924822 For Iveco Daily

Car Bumper Support：

The bumper support is the link between the bumper and the body parts. When designing the bracket, it is first necessary to pay attention to the strength issue, including the strength of the bracket itself and the strength of the connection structure with the bumper or the body. For the connection structure, it is necessary to reasonably arrange the cantilever length, thickness and spacing of the buckle connected with the bumper skin to make the connection stable and reliable.

Of course, while ensuring the strength of the bracket, it is also necessary to meet the lightweight requirements of the bracket. For the side brackets of the front and rear bumpers, try to design a "back"-shaped box-shaped structure, which can effectively reduce the weight of the bracket while meeting the strength requirements of the bracket, thereby saving costs. At the same time, on the path of rainwater invasion, such as on the sinking platform or installation platform of the bracket, it is also necessary to consider adding water leakage holes to prevent local water accumulation.

In addition, during the design process of the bracket, the clearance requirements between it and the surrounding parts also need to be considered. For example, in the central position of the bracket in the middle of the front bumper, in order to avoid parts such as the bonnet lock and the bonnet lock bracket, the bracket needs to be partly cut out to avoid it, and this area also needs to pass the hand space check. For another example, the large bracket on the side of the rear bumper usually overlaps with parts such as the pressure relief valve and the rear detection radar. The bracket needs to be cut and avoided according to the surrounding parts envelope, wiring harness assembly and direction.

Our  Services

+ Supporting our clients to source the new suppliers

+ Storing the goods collecting from suppliers

+ Sample order 

+ Combining the shipment 

+ Making packages change,sticker and laser printing  

Our company is very specialized in dealing with the spare parts for European Commercial Vehicles and Pickups in China for over 12 years. We can supply you the spare parts for the following applications:

- Iveco Daily / Stralis / Trakker / Eurocargo / Tector / Cursor

- Fiat Ducato

- Peugeot Boxer                                                                                                       

- Citroen Jumper

- Renault Master

- Ford Transit

- Mercedes Benz Sprinter

- Hyundai H100

- Kia Besta

- Mitsubishi L200 GL/Pajero Sports/Outlander

- Toyota Hilux ECT.

Taking the full advantages of our good location in Auto parts base, we has built a stonger supplier chains with our factories for the good quality and reasonable prices. Meanwhile, to meet the diversified needs of our customers, we have our own warehouse with over 8,000 square meters for our customers to collect the goods and make the services for re-packing ect. before the shipment. We are very confident we will tie closer relationships with you for our long terms cooperation and mutual benefit.

Hope to be your supplier in China!

FAQ